|
Search:
Type: Posts; User: StinkWheels
Search:
Search took 0.02 seconds.
-
I was talking to the guys at Nova Racing Transmissions. They inspected my 4DP clutch boss and can produce a 3 piece replacement with steel backing plate, separate drum and spring pillars for around...
-
Thanks Luca
I managed to find one in Japan c/w relay arm
-
Try Dan
at Gecko Motorcycle Imports he may be able to help (check his website)
-
I just submitted a hi res copy of the TZ250B manual (english) and it can be found via this forum at the last posting
http://pure2strokespirit.net/forums/index.php?topic=2367.0
the earlier...
-
The only thing wrong is that if you add multiple items from DTR to your cart in ebay it won't allow you to checkout and request total from seller - something about seller doesn't combine shipping,...
-
I got a few parts from Dan,
last time I looked he didn't have what I needed
The TZR 3XV SP swing & relay arms fit, so I able to use the bike. The geometry is slightly out which has to...
-
I scanned and got it posted here - be warned its not the best but better than nowt !
http://pure2strokespirit.net/forums/index.php?topic=2367.0
-
That's correct Doc.
they should start open cycle closed and open and stay that way, and as you found the setting up of the cable slack for both open and closed positions is necessary.
I always...
-
Hi all,
to finish off my restoration of this bike I am short:
3YL Swing arm
3YL Relay arm
if any one has either surplus to requirements and wants to part I would be most appreciative.
...
-
Received my 3YL Radiator this week from Mark.
Nice bit of kit, many thanks.
Jools
-
I got that effect with tailored intake stacks - the rear was ovaloid to miss the cross member, the front was a snail shell shape which prevented the ram effects into the carb....
-
-
Dan did have some but I was too late.
The TM38-131 electronic PJ variety are advertised at a shop in the Netherlands at 370 Euro Each.........
But as I have these Lectrons in the drawer, and...
-
Not familiar with that type.......................??
-
Paul Gast has suggested a 5.2 needle as a good start point on the 38mm's.
PJ's I'll start with a #50 and go from there. It will be a while before I am in a position to try this out - the engine is...
-
Yes, I'm thinking that too, but as the powerjets operate differently it would require a different mindset in setting them up and knowing which needle to start with.
I may drop an email to the guys...
-
Has anyone fitted any Lectron powerjet carbs to their TZ250 3YL, 4DP ??
I'm curious to know if its a worthwhile fitment as I am struggling to find any OEM style carbs and I have some 36mm and 38mm...
-
Late reply to this but Gecko Imports in the UK has a Spondon chassis for a V twin...............
http://www.geckomotorcycles.co.uk/magento/parts-yamaha/tz/chassis/4dp-yz250-spondon-chassis.html
-
Hi everyone,
As the title suggests I'm looking for a pair of power jet OEM TM38's for my TZ250B restoration.
Must be complete and in good order.
Delivery to NSW, Australia.
thanks
-
Hi MArk
PM sent last night
Jools
-
If yamaha did produce those quantities each year i wonder how many crates are unopened in warehouses around the world............
-
1rk - starts 1RK-000101 - ends 1RK-001000
2km - starts 2KM-000101 - ends 2KM-001000
3ak - starts 3AK-000101 - ends 3AK-002000
3lc - starts 3LC-000101 - ends 3LC-002000
3tc. - low 003 (starts...
-
Got the P6 TZR and the LC again.
Hopefully the P6 will be a bit easier to ride now the power valve is working, even though its a TZ controller and a bit abrupt.
And thanks to Kwick Rock, the LC...
-
PCRA actually promote (?) a GP125/250 class............
A few years ago before the advent of the F1, F2 & F3 New Era/Pre Moderns, the New Era 250 class actually had a thriving 250 GP...
-
looking for a good Gas tank for my resurrected 3YL project.
Anything considered...........well, within reason !!
Jools
Sydney,
Australia
|
<% COPYRIGHT %> |
|
|
|