| | |
|
-
... feel the power...
Measuring Fittings - late model carbs
a d v e r t i s e m e n t>
Could I ask some kind soul with Keihin carbs on his '99+ 250 for some measurements? I'm looking for the thread size on the cable spout, the cable diameter, and the length & dia of the button on the carb end of the cable.
TTR Ignition Systems
Quick Shifters - Inline Shift Sensors - Rev Limiters & Launch Controllers
[ Coming Soon - Replacement Harnesses ][ Vapourware - Programmable Ignition ]
Former (waayyyy former) RACE #125
-
...them shiny thangs sure are purty...
Squarebore (98+) TZ125's use Keihin carbs but I thought the rest of the TZ125s and TZ250s use Mikuni carbs. That being said, I have a 2000 TZ250 that I can measure. Could you elaborate on "cable spout"?
-
... feel the power...
Hi, Dan.
The squarebore 250s changed carbs as well; they sure do look like the Kehins used on the 125s! (shrug)
Anyway - at the top of the carb is a little brass (?) elbow screwed into the carb lid. It has a threaded end and locknut that the throttle cable sleeve threads onto - I'd appreciate the thread size of that piece - particularly at the cable end, at both ends if possible.
Can I add the cable sheath OD at the carb to the list of measurements?
Thanks much!
TTR Ignition Systems
Quick Shifters - Inline Shift Sensors - Rev Limiters & Launch Controllers
[ Coming Soon - Replacement Harnesses ][ Vapourware - Programmable Ignition ]
Former (waayyyy former) RACE #125
-
...them shiny thangs sure are purty...
The carbs are Mikuni for sure.
Cable sheath OD is 7.2mm
The threaded portions:
At carb end. 6mm x 0.8mm
At throttle tube end. 6mm x 1.0mm
Bobbin at end of cable that pulls up the slide is a small cylinder 3.0mm diameter. 4.3mm height
I sent you a PM on another topic. Would you take a look when you have a chance?
Thanks Don
Dan Decker
CCS / USGPRU #464 AM
-
... feel the power...
a d v e r t i s e m e n t>
The carbs are Mikuni for sure.
Learn something new every day ...
Thank you for the info - greatly appreciated.
Email replied.
TTR Ignition Systems
Quick Shifters - Inline Shift Sensors - Rev Limiters & Launch Controllers
[ Coming Soon - Replacement Harnesses ][ Vapourware - Programmable Ignition ]
Former (waayyyy former) RACE #125
Similar Threads
-
By Alex V in forum TZ250 & TZ125 GP Motorcycles For Sale! - Buyers and Sellers
Replies: 0
Last Post: 01-26-2010, 09:17 PM
-
By rimbytx in forum Yamaha TZ GP Motorcycle Parts
Replies: 0
Last Post: 04-17-2008, 02:35 PM
-
By chuckactor in forum Yamaha TZ GP Motorcycle Parts
Replies: 1
Last Post: 12-07-2006, 08:21 AM
-
By jim137 in forum Tires, Wheels & Bodywork for 125GP & 250GP Motorcycles
Replies: 3
Last Post: 12-27-2005, 09:53 PM
-
By stuart carter in forum RS250 & RS125 GP Motorcycles For Sale! - Buyers and Sellers
Replies: 0
Last Post: 10-24-2004, 07:40 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
<% COPYRIGHT %> |
|
|
|
| | |
Bookmarks