Page 1 of 3 123 LastLast
Results 1 to 5 of 14
  1. #1
    ...New Member...
    Join Date
    Oct 2008
    Location
    Birmingham, England
    Posts
    6

    3TC 250A Ignition stator info required



    a d v e r t i s e m e n t

    Hi,
    I have a TZ250 A 3TC 1990 model, and the ignition parts are proving to be a bit difficult.

    Basically I have a load of ignition bits off a 3TC and some off a 3LC, and am not sure as to what the correct stator and rotor should be for the 3TC A version. I believe it doesn't run a battery pack, so the rotor and stator must also be a generator. Could someone please send me pictures of the rotor and stator, with any identifying numbers/letters on them?

    Also any alternative to the Yamaha item, if my bits are no good?

    All help is appreciated, to get this back up and running to join the TZ350 's that I have.
    Cheers, Andy

  2. #2
    If you can wait until Monday, I'll be able to read the numbers off my TZ250A ignitions.

    You are correct, there is no battery pack required.

    I have 2 ignition sets I use, and both have different but matching numbers. I have no idea why.

  3. #3
    ...New Member...
    Join Date
    Oct 2008
    Location
    Birmingham, England
    Posts
    6
    Hi, That would be great thanks. Have waited a few years, so a couple of days won't hurt!

  4. #4
    The two A model ignitions I have are 7JZ and 11JX. This is stamped on both the rotor and the stator so I use them as matched sets.

  5. #5
    ...New Member...
    Join Date
    Oct 2008
    Location
    Birmingham, England
    Posts
    6



    a d v e r t i s e m e n t

    Great, thank you for the info. I've found the rotor that goes with the stator! They both have 11HY stamped on them. So that is a good start for getting this together. I don't suppose you happen to have a photo of the stator, without a rotor on it, as I'm not sure if a part is missing. There is one pickup on the outside, and inside there is only one induction coil. Do you know if that is correct for the A ignition?

Page 1 of 3 123 LastLast

Similar Threads

  1. '90 3TC 250A Suspension Question
    By rzu4eah in forum TZ Suspension
    Replies: 1
    Last Post: 03-13-2017, 01:49 PM
  2. Wheel info required
    By subwoody in forum Tires, Wheels & Bodywork for 125GP & 250GP Motorcycles
    Replies: 0
    Last Post: 04-07-2005, 04:30 PM
  3. tz 250a 1990 complete ignition
    By trick500 in forum Yamaha TZ GP Motorcycle Parts
    Replies: 2
    Last Post: 04-20-2004, 05:47 PM
  4. tz 250a 1990 complete ignition
    By trick500 in forum Yamaha TZ GP Motorcycle Parts
    Replies: 0
    Last Post: 04-20-2004, 02:23 AM
  5. 250a ignition
    By trick500 in forum TZ Ignition, Electrical & Instrumentation
    Replies: 1
    Last Post: 06-02-2003, 09:23 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


<% COPYRIGHT %>