WTB Pistons for 91 rs250

[SVRGP]

Look for some pistons for my 91 rs250. The wrist pin is 14mm. If anyone has some new ones for sale let me know.

[Thack98]

RS125 pistons are the same.

[SVRGP]

Yes the 125 are the same.

[Tom Luton]

You should have no problems obtaining new ones from an HRC store -

Part no is - Piston-13100-NF5-710

Circlip- 13112-MLO-720

Piston Ring- 13121-NF4-751

Piston Pin- 13111-NH3-000

Smalll End- 91008-NF5-711

In my experience always use new circlips and replace pin and small end if look worn.

You also need to champher the ring grooves as per the HRC manuel or they are prone to sticking in and wrecking your nicosil in barrel.

Hope this helps... http://www.tz250racing.com/iB_html/non-cgi/emoticons/smile.gif

[drschneider]

Hi Tom http://www.tz250racing.com/iB_html/non-cgi/emoticons/smile.gif
i think you wont get the 91 Pistons from Honda. Also the Small Ends are not longer available. I asked here in Germany and in Japan. Can you get the parts in GB?

regards

[SVRGP]

I've tried to get ones for a hrc carriers from here in the states and they all said good luck. So if anyone can get them would be great.

[SVRGP]

So I'm having pistons custom made. Looking to see if anyone else needs any pistons.

[drschneider]

can you send me a pic of the pistons? And the price?

email: drschneider@gmx.ch

[SVRGP]

Getting pistons made. Should be here in 4 to 6 weeks. Comes with piston, Ring, clip , and pin.

[racerxgirl]

Whats the cost for the top end? Just curious...