6 pallets of 125 and 250 parts!

[sbrokerboy]

I just bought 6 palletts of HRC 125 and 250 parts, Mainly late 90's stuff, I have not had an opportunity to dig through everything, but all the stuff is BRAND NEW and IN the boxes, there is even some older stuff I.E. '78 model gas tank NEW in BOX. Let me know what your looking for and I will see if I have it.

[Rob B]

I'm curious of what RS250 parts you have for a 97-00.

[sbrokerboy]

Rob I know there are expansion chambers, stingers, wheels, cases and abunch of other stuff when I get everything sorted I will post up a list.

[parillaguy]

A 1978 fuel tank would have to be MTR125 and a RSC part as HRC wasn't around till early 1980s.

Any other MTR125 parts (1975-1979)? How about 1984 RS125? I have both and any parts would be of interest.
Parillaguy

[sbrokerboy]

I did see one perfect new old style expansion chamber, the kind that has the stinger built in! I do not know what the part number was but I remember looking at it, and saying man that is an old piece. I should hope fully have stuff up next week.

[Jim]

If there any rs250 forks and triples in there, please email me the details. Thanks.
-Jim

[jamey927]

Interested in anything for 98' RS125. Triple clamps, engine cases, etc..If you could post a list that would be great.

[drschneider]

Hi,
im intrested in any Parts for the 91/92 Honda RS250. If you got some, let me know.

Christian http://www.tz250racing.com/iB_html/non-cgi/emoticons/tounge.gif

[sbrokerboy]

I did see some fork tubes, I do not know what years, but I also saw some springs as well.

[jamreg95]

Im looking for spares for my 99 RS250. Please keep me in mind for a rear wheel, levers, clutch, top end kit, rear sets, etc... You can send me a pm or email me at jamreg95@msn.com ("jamreg95@msn.com) with parts available and prices. Please include payment method (paypal, wire transfer, etc..). Thanks. JA... http://www.tz250racing.com/iB_html/non-cgi/emoticons/smile.gif

[sbrokerboy]

I will be contacting everyone individually if you leave me your email and or Telephone Number, or you can call me personally at 501.831.9413, I am going through the parts pulling out what people want first, then contacting them with the information, I prefer paypal or cashiers check, I will take a personally check but it has to CLEAR first, before I ship.

So if you have anything that you are looking for specifically just let me know!

[sbrokerboy]

O.K. I have contacted almost every body back almost all the 96+ 125 stuff is sold, I have a bunch of pre 95 stuff left, and I have tons of mid 80's stuff, you nam it I have it, it is all new in the box.

let me know

I have been overwhelmed with the reponse to this stuff, I will be contacted those of you I have left.

[sbrokerboy]

In digging through I have uncovered some more 96 and new stuff, cyls cranks cdi's etc.

[johnbucknall]

HI have you got any Mag/gen sets for 93-00 rs250
if so how much? also mufflers and any engine bits/carbs.
Thanks
john bucknall

[sbrokerboy]

I have part number 30400-nx5-771 retail price 576.20 usd yours for 485.00 plus shipping! let me know I accept paypal.

[bloodnut]

Hi

I need a RS250 93-99 Stator and flywheel.

cheers
Jared

[Tom Luton]

Take it you got bumped stroker boy? Shame!!!

[Boz]

I'm also looking for a set of USD RS250 forks. Pretty much an entire front end.

[sbrokerboy]

only have the pre 93 forks

[SVRGP]

Looking for a right side cover for a 91 rs250r. Parts number
11331-NF5-710.

[tasman]

Hi ,
we urgently require an expansion chamber to suit pre95 RS125.
Are you able to help ? Please reply ASAP.

Thanks Tim

[richonenz]

Hi Mate , looking for some wheels , need the single sided 5" rear and a front to match , I believe it came out on some 95 models , would have to be original as I don't believe any of the after market wheels came in a 5" .

Thanks in advance Rich
You can contact me at jt.oneil@bigpond.com ("jt.oneil@bigpond.com)

[sbrokerboy]

here is a list of parts that I have (I hope if I can get the excel to work right!)

[36DDsplsme]

sbroker,

i have sent you a PM re parts in the spreadsheet you posted.

Graham

[sbrokerboy]

I sent you an email, those wrist pins are 14mm, will they work?

[racer7]

Pre '95 Parts.
Crank/ cases/ gears wanted.
racer7
tied777@bigpond.net.au ("tied777@bigpond.net.au)

[chris55555]

hi

i am looking for RS250 forks and front brakes
radiaotor
rims
frames
etc
please mail me your list
thanks
chrismurphy@xsinet.co.za ("chrismurphy@xsinet.co.za)

[hawkmeister]

i am looking for a rear brake caliper nissin 2 piston do you have one and if so how much are you asking also 91 upper fairing


Andrew Cuttler

andrew@hindle.com ("andrew@hindle.com)

[sbrokerboy]

Check your part numbers against the spread sheet. ( I believe it is on page 3)

[RcrBoy]

Not too sure what you have left.....
I'm picking up a "new" to me 1993 RS250 in Jan. Could always use new spares.......

What's left?http://www.tz250racing.com/iB_html/non-cgi/emoticons/rock.gif

Mark J Amable
AFM#324
RcrBoy@tmail.com ("RcrBoy@tmail.com)

[rc51paul]

What is the diameter of the pre 93 forks? I assume these are the conventional style? Maybe the NSR needs an upgrade http://www.tz250racing.com/iB_html/non-cgi/emoticons/tounge.gif

[rvf]

wheels and fork for a rs250r 1993-1999

Michael

[RS-Racer]

Matey
Im after a 14 tooth front sprocket and a set of mufflers for a 93-99 model rs 250.Let me no if you can help me.
Thanx

[SVRGP]

I noticed in your list of parts you have internal gears for a 91 rs250. I like to know if they are still for sale. If you could email me at tripod232002@yahoo.com. ("tripod232002@yahoo.com.) thanks.

[tz88]

Do you have a clutch perch (bearing style)?

[propracer]

I am looking for a tach for a 1985 RS250. I also have a 91 and a 93 RS125 and would consider any parts for those, especially engine parts. Also looking for aircooled engine top end for my MTR 125, 1975. Let me know ... Thanks for your time in advance.
Luc http://www.tz250racing.com/iB_html/non-cgi/emoticons/tounge.gif

[tzmono]

do you have an rs250 rear wheel? sssa version
Thanks,
Pat

[sbrokerboy]

wow I had forgotten about that post, I don't have the wheels I do have the internal gears and I have the pistons to fit your bike

[cspargo]

wow I had forgotten about that post, I don't have the wheels I do have the internal gears and I have the pistons to fit your bike
How about early MT 18" aluminum rims?

[sbrokerboy]

nope already gone

[gpconcepts]

Hello, A friend needs cases for a 1997 RS 250. Any help would be appreciated. also a useable crand and cylinder for the same.

Thanks,

Rich

[Wild Child]

Hi Rich http://www.tz250racing.com/iB_html/non-cgi/emoticons/biggrin.gif

~Jeff

sbrokerboy,

Do you have a 98-00 tank for a 250?

Thanks!

[sbrokerboy]

Nope sorry just the older stuff.

[Jeda]

Hi Sbrokerboy
don't suppose you have a RS125 front hub ie spoked wheel

[sbrokerboy]

nope sorry

[Ryan Conrad]

I have a 94 Honda RS 250. I need some forks for it as one is damage on the bottom dampner. I believe newer years will work also. If you have any or any connections to some I really would appreciate it.

[roadracer1]

Hello my name is adam im looking for honda rs 250r heads that are unleaded... Please contact me asap its and emergency. 561-789-8457 thankyou so much

[roadracer1]

Hi im looking for leaded heads for a honda rs 250 r asap call me at 561 789 8457 THanks Adam

[sbrokerboy]

Nope I don't have any heads. But Kevin Murray can machine your unleaded to leaded spec. It is MCE racing and he does great work.

[geosot]

Do you still have the tank? What year ? what condition?

[daslowguy710]

got any 250 body work ? damaged is ok
daslowguy710@yahoo.com ("daslowguy710@yahoo.com)

[sbrokerboy]

sorry I don't have any.

[Just-Us Racing]

Any RS250 gears in your collection of parts?

I need the following part #'s:

23212-NX5-000
23445-NX5-000
23462-NX5-000
23473-NX5-000

Thanks for any help!

Adam

[sbrokerboy]

no just the older nf5, nd5 stuff.

[zilo]

Hi
I'm looking for a pre93 classic fork or at least a pair of stanchions and an original front wheel same vintage
regards

[rzmitchv4]

Looking for rear sprocket rubbers for 94 RS125 and the right side rears chain adjuster assy complete...do you have one? Anybody...help!
Mitch

[sbrokerboy]

no I sold out of all those things.

[Jeda]

Looking for a shift drum RS125W 1980 Part No 24310-NA4-000

HELP!!!!!!!!!!!!!!!! http://www.tz250racing.com/iB_html/non-cgi/emoticons/sad.gif http://www.tz250racing.com/iB_html/non-cgi/emoticons/sad.gif http://www.tz250racing.com/iB_html/non-cgi/emoticons/sad.gif http://www.tz250racing.com/iB_html/non-cgi/emoticons/sad.gif http://www.tz250racing.com/iB_html/non-cgi/emoticons/sad.gif

[sbrokerboy]

Nope will a later model work?

[Jeda]

Unknown ...how late are we talking ,don't suppose you have a part No for the one you do or might have
might be able to see if they supperseed

cheers
Andrew de J

[yammit]

I just bought 6 palletts of HRC 125 and 250 parts, Mainly late 90's stuff, I have not had an opportunity to dig through everything, but all the stuff is BRAND NEW and IN the boxes, there is even some older stuff I.E. '78 model gas tank NEW in BOX. Let me know what your looking for and I will see if I have it.
hi, need pistons for an 86 model rs 250 rf 56x 50.6 bore and stroke
Thanks
John.L.

[Jeda]

Sbrokerboy
I don't suppose you have an '86 RS125 4 bolt rear disc amongst your mountain of parts ..... Here's praying heavily http://www.tz250racing.com/iB_html/non-cgi/emoticons/smile.gif

[sbrokerboy]

do you have a part number?

[sbrokerboy]

I had about 10 of the 56mm pistons but have since sold out sorry. Still have 54mm 13100-NF4-020 (14mm wrist pin)

[bloodnut]

Hi,

what model rs250 fuel tank do you have left?

Also what model rs250 radiators do you have?

cheers
Jared

[sbrokerboy]

nopethey sold a year ago, sorry

[fredybender]

What do you have left for ND5's http://www.tz250racing.com/iB_html/non-cgi/emoticons/rock.gif
Need a bunch of stuff for my project...

12191-ND5-810 HEAD GASKET
12192-KM4-000
12193-ND5-810

13131-ND5-000 PISTON RING

91008-444-004 CON ROD BEARING

23801-NE5-000 SPROCKET
23801-NE5-820
23803-ND5-750

45208-ND5-751 PISTON SEAL

53170-MJ4-006 LEVER

19000-ND5-750 RAD
46500-ND5-750 PEDAL ASSY
46501-ND4-750 PEDAL RUBBER

50815-NC8-000 PANEL

64200-ND5-750 SCREEN

13100-ND4-700 PISTON


Fred

[JeZzY]

got any of these laying around still?...for a 92rs125

coil, ignition 30500-NF4-780
stator comp 31120-NF4-771

[haggis]

Desperately seeking any MT125R parts in Scotland .
What do you have left if anything ? Footrests ?
http://www.tz250racing.com/iB_html/non-cgi/emoticons/smile.gif

[sbrokerboy]

I have the coil for the rs125, do you have a part number for the MT?

[parafix]

Do you have any good barrels for a 94 rs250, if so what cost ? and also postage to Brisbane, Austrailia?

[tz250w]

Have you any parts left for pre 90 125@s

Tz250w

[Andrewjones]

Good day mate...

I have a NF5 what do you have for the bike???

my email is jonesunited@people.net.au ("jonesunited@people.net.au)

have a great day...

[Sjutsje]

Hi,

Do you have parts for a Honda RS125RS-W 1979 http://www.tz250racing.com/iB_html/non-cgi/emoticons/rock.gif

Regards Rene

[goldman812]

looking for older rs125 non inverted front end. forks,triples,brakes,rear shock. email goldman812@yahoo.com ("goldman812@yahoo.com)

[dmax]

I'm interested In '93-2000 rs250r parts rear hub,caliper,shock, subframe,tank fairing mounts Etc.
E-Mail Me at dmaxexhaust@msn.com ("dmaxexhaust@msn.com) if there's any parts left
Thanks,
Dwight http://www.tz250racing.com/iB_html/non-cgi/emoticons/cool.gif

[falstomba]

do you have a left front brake caliper.

[TZMkart]

Hi Do you have any ignition rotor/stators for the post 95 125's.
Internal type, as I need a number of them.

Thanks

[sbrokerboy]

Nope I just have old little stuff now.

[Ara7]

What parts do you have, if anything, for a '91 RS125?
I really need a temperature gauge.

Thanks,

Ara

[geosot]

I had about 10 of the 56mm pistons but have since sold out sorry. Still have 54mm 13100-NF4-020 (14mm wrist pin)
Do you still have the pistons? Looking for 4 pistons/rings (54 mm/14 mm pin)

[gsxrbeast]

Do you have any 98+ top end kits? pistons, rings, bearings, heads? Fairings?

[Camp170]

I think this guys whole lot of remaining stuff is listed on ebay right now.
Item#270434961749

[redbimotal]

Looking for a set of RS 250 R rotors ?
contact : eavb@tiscali.nl

[sbrokerboy]

Nope they have been all gone for a year or so.

Sorry

[TZJapan]

Nope they have been all gone for a year or so.

Sorry
I have all the parts from sbrokerboy and Thousand Oaks HRC. All the parts are in Japan now there is nothing left in the USA. Contact Rick at RMD Motors if you need parts.